| Author | Message | ||
| marvin pack (Gomer)
Registered Member Username: Gomer Post Number: 646 Registered: 3-2007 Posted From: 71.53.155.14  Rating: N/A |
I know in the archives there is a thread but I can't find it. Can ya hep me?? Gomer | ||
| john w. roan (Chessie4905)
Registered Member Username: Chessie4905 Post Number: 1734 Registered: 10-2003 Posted From: 71.58.71.157  Rating: N/A |
3" at front, 3 1/4" at rear. Measurement is between axle bumper and axle. This is assuming bumpers in good condition and not flattened out. From my 4104 manual | ||
| Patrick levenson (Zubzub)
Registered Member Username: Zubzub Post Number: 118 Registered: 5-2007 Posted From: 174.91.230.30  Rating: N/A |
FWIW bump stpps are 1 3/4" high when new so just add to the 3" and measure between axle and beam. | ||
| marvin pack (Gomer)
Registered Member Username: Gomer Post Number: 647 Registered: 3-2007 Posted From: 71.53.155.14 Rating: N/A |
Thanks Pat And Chessie. I couldn't find it anywhere so I thought I would ask. As it says Ask and you shall recieve. Gomer |